I'm getting ready to build a cowl for my Dragonfly and realize I need a
    spinner to blend into.  Does anyone have a 10" to 12" spinner they are
    willing to part with?  It's going on a three blade warp drive prop.
    Thanks
    Randy

    It is easier to build a cowl for the rotary if you use a
    larger spinner. You can borrow my 16 inch for a mold Randy.
    I also have a smaller one if you insist :)

    Paul Lamar



A 16" spinner would cover half my prop!  I may take you up on the
smaller one though, do you know what size it is?   I have a bunch of
stuff to return to you so I'll be getting out your way in the near future.

Thanks,
Randy

I think you're exaggerating a little bit :) Did you get the warp drive
blades and hub? I think you will find 16 inches is about right :)
However you can use the smaller one I have for a mold. My guess is
12 inches. Come over about 1 PM. I should be out there about then.

Paul Lamar