Paul,

I have been doing some research on MS and it is very promising.  There area
number of softwares that permit you to tune it and datalog.  Ernest Christley
has a video on You tube with his Delta Dyke running using MS. He is using a
Ford EDIS system with MS.  There is a rotary MS group that has a lot of
experience with working out the details.  I believe they allso got the Renisis
to run on MS.  If I can get the ignition worked out I might try it.  I need
a third gen trigger wheel set up as I had to remove the 2nd gen CAS.  MS runs
great with the 2nd gen CAS but I cannot take advantage of that due to tight
cowl.


Joe Berki
Limo EZ


Try Mazdatrix or Dave Atkins for the 3rd gen trigger wheel.
Or you could rent one and make a laser cut steel copy.

Paul Lamar