Subject: The very first race that had a car with a wing.
From: Rotary Engine
Date: 6/26/2011, 3:39 PM
To: AAA Put this in the To box


Suspension mounted no less. That very desirable feature has yet to be
successfully implemented in Formula 1. Yes they built some suspension
mounted wings but the engineers (Colin Chapman among others) did not
understand the structural principles so they failed.

World F1 champ Phil Hill driving.

Engineers working for race car companies like Chaparral in those days
did everything as needed including *schlepping tires, taking the driver
to the hospital if needed  and putting out fires during pit stops :) You
think I am kidding. Phil Hill got appendicitis just before the Sebring
Race so yours truly drove him to the hospital.

The composite wing picture is the first wing I built after I left
Chaparral. It was built for Nick Craw, one time FIA vice president, SCCA
president and head of the Peace Corp at the time.
Nick reported he donated it to the Smithsonian but I have never saw it
on display. As I recall it had vacuum molded thermo formed ribs. Nick
set lap records all over the country in Formula B that still stand. The
joke is there is no more Formula B :)

I just discovered these old negs and had them printed.

Paul Lamar


Paul: nice of you to remember but that is somebody else's car.
Remember, you built in a driver-actuated trim tab driven by a solenoid
inside the wing for the "up down" option.  BTW, my wing never failed or
even came close over some forty races.

Best regards,

                             NWC.

Thanks for clarification on that Nick. It was at least 42 years ago :)
I have no idea who owned that car. It could be Anthony Lloyd.
It was built in my garage before I opened my shop in Hermosa
Beach. What year did you buy it from me? The only trim-able wing
I remember building was for Chris Amon. That had a button on
the steering wheel which activated a solenoid in the leading
edge which then activated an aerodynamic servo or trim tab
that flattened the wing. We never got it sorted as we ran out of
time to handle the down force change on the nose before the Can Am
series began that year. Chris tried the button once and it scared
him so bad he never did it again :) Of course we had a bunch
of down force on the nose and the power was close to 850 HP.
That is a lot of power over steer :)


Got any pictures of your car you can scan and email?

We built a ton of wings for Carl Haas which he resold every
time he sold a new Lola Formula A. It may have been during that time
I built yours.


Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.