Subject: running a rotary on propane
From: Rotary Engine
Date: 6/29/2011, 8:06 PM
To: AAA Put this in the To box


Are there any advantages or disadvantages to running a rotary on propane and
or natural gas (methane)? Both have a higher BTU rating than aviation
gasoline.

We will be operating in remote areas with propane as our fuel source -
liquid methane is also a possibility.

The propane is easier to store than methane i.e. low pressure non cryogenic
liquid.

Any conversion issues unique to the rotary? I have read conflicting
information that direct conversion of vehicle engines from gasoline to
propane result in a slightly lower to slightly higher HP output? If you
throughput the same amount of fuel by weight it should be about 6% greater
HP or 6% lower fuel consumption for the same HP.

Fuel        BTU/lb         BTU/gallon

Gasoline -     18676         116090
#2 diesel -      18394         129050
Ethanol -     11585         76330
Propane -     19900         84500
Methane -      20263         19800

I understand that one can convert using a dual fuel approach i.e. set to run
on propane with a switch to go to gasoline (not both at the same time). Two
fuel tanks though.

Cheers,

Brian Feeney
alaia design



-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.