Subject: Stator flywheel attached to propshaft
From: Rotary Engine
Date: 7/2/2011, 11:55 AM
To: AAA Put this in the To box



Paul,

Here is a sketch of an idea to attach the stator flywheel to the prop flange,this can be adaptable to the Tracy housing for the stator i guess but i don't have his dimensions


Jean Prudhomme


Yes that would work as just an alternator if you can find large magnets designed for a 6.5 inch diameter drum. It would not work for ignition as the gear ratio
would mess the timing up.

Better to do what you are doing.

Paul Lamar
                        

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.