Subject: Stator flywheel attached to propshaft
From: Rotary Engine
Date: 7/2/2011, 6:16 PM
To: AAA Put this in the To box


 Paul,

 Here is a sketch of an idea to attach the stator flywheel to the prop
 flange,this can be adaptable to the Tracy housing for the stator i guess but i
 don't have his dimensions


 Jean Prudhomme


 Yes that would work as just an alternator if you can find large magnets designed
 for a 6.5 inch diameter drum. It would not work for ignition as the gear ratio
 would mess the timing up.

 Better to do what you are doing.

 Paul Lamar

    
Ok i see what you mean.


Jean Prudhomme
                   

Here is the complete dual redundant dual back up ignition system.
Engine still runs if you loose the main alternator and electrical
system. CD on the leading (Lower) plugs and RX8 style inductive ignition
on the trailing (Top) plugs.  Basically it is like a solid state mag.
The low current 5 volts for the  hall effect sensors can be powered by the OMC power coils.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.