Subject: Whitman talk on the 16th.,
From: Rotary Engine
Date: 7/6/2011, 11:50 PM
To: AAA Put this in the To box



Hi Paul,  just want to confirm you will be able to give your presentation
at EAA Chapter 40 on Sat., July 16.  I know it is Carmigedion; 405 closure.
If you are coming from SZP it should not be a problem.

Murry

Yes I thought I responded to that this morning. You may have missed it
as it had a different subject header.


-------- Original Message --------
Subject: Cozy4 rotary
Date: Wed, 06 Jul 2011 08:42:15 -0700
From: Rotary Engine <rotaryeng@earthlink.net>
To: AAA Put this in the To box <rotaryeng@earthlink.net>


Hi Paul!

I believe you are scheduled to speak at Whiteman Airport this month. I will
try to bring my firewall backward setup from my cozy4 as a display. I should
easily have the tube frame built and set up on an engine stand. I need one
of your Rhino drawings to start the tube frame. I can also bring a
dismantled rx7 engine to put on the table, and should have some soldered
aluminum tube p ports ready to show. I will be purchasing a reduction unit,
and bell housing soon, and may have it there as well.

I plan on using megasquirt to start with, for the ignition/injection stuff,
and am going to purchase one or more of the atmel boards to see what I can
do with that. I also plan on using a motorcycle stator/alternator setup for
ignition backup.

Can you recommend a pc based oscilloscope? usb style maybe?

Ed Carver

Whiteman on July 16th 10:30 AM.
Maybe we can talk Dave Leonard into flying his RV6 up.
Or Steve Thomas Glasair from Santa Barbara.
Randy's one rotor Dragon Fly and Mike's RV4 are not quite ready to fly.

I don't have any direct experience with PC based oscilloscope.
However for our purposes this device will do everything
we need done for way less money. Less than $100.
It will give you valuable feed back data on your EFI in the
bargain. It will tell you what happens when and how much.

You will need to add some $10 pressure sensors if you
are looking at manifold pressure or air speed. It is also
a good idea to use $1 opto isolators if you are looking for digital
events such as ignition coil and injector triggers.

I have successfully used this one but there are several others on the market
for about the same amount of money. Search Data Acquisition.

http://www.hytekautomation.com/

http://www.hytekautomation.ca/U120816.aspx?productId=1


Paul Lamar

-------------------------------------------------

I did forget to attach some Rhino motor mount dwgs for
Ed.

The best thing Ed is log on to the web site and save what pictures
you need from that.

http://www.rotaryeng.net/mm-instruct.html

If you have something more specific in mind ask away.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.