C SmithI will need those rubber bushings also with the damper plate send it a;;
assembly because i have to figure out those bushing are different location then
the RX8the plate is a;ready design but i still need your demper dimentions to
finished


Jean Prudhomme


Paul I do have the middle part already machined what i need is all other dimensions and rivet circle and size.When the damper completed ddi you have any suggestion how to balance  for the high speed          Jean Prudhomme

I have Michael Hart working on it.

Paul Lamar


Jean, the damper plate is a single assembly, with the bushings installed.
C. Smith