C SmithI will need those rubber bushings also with the damper plate send it a;;
assembly because i have to figure out those bushing are different location then
the RX8the plate is a;ready design but i still need your demper dimentions to
finished


Jean Prudhomme


Paul I do have the middle part already machined what i need is all other
dimensions and rivet circle and size.When the damper completed ddi you have any
suggestion how to balance  for the high speed
Jean Prudhomme

I have Michael Hart working on it.

Paul Lamar


Jean, the damper plate is a single assembly, with the bushings installed.
C. Smith

                       

YES I KNOW BUT I NEED ALL SET UP TO FIGURE OUT THE SPACING AND HOLE SIZE FOR RUBBER BUSHING,IF YOU CAN SEND ME THE FULL ASSEMBLY,RUBBER BUSHINGS,WASHERS,BOLTS AND NUTS,RIVET SIZES.AND SPACING.I WILL RETURN TO YOU WITHIN A DAY AFTER I TOOK ALL INFOS PLUS WILL ADD SOME MONEY FOR THE SHIPPINGTHANK'S


Jean Prudhomme