C SmithI will need those rubber bushings also with the damper plate send it a;;
 assembly because i have to figure out those bushing are different location then
 the RX8the plate is a;ready design but i still need your demper dimentions to
 finished


 Jean Prudhomme


 Paul I do have the middle part already machined what i need is all other
 dimensions and rivet circle and size.When the damper completed ddi you have any
 suggestion how to balance  for the high speed
 Jean Prudhomme

 I have Michael Hart working on it.

 Paul Lamar


 Jean, the damper plate is a single assembly, with the bushings installed.
 C. Smith

     Paul I just received the uni carbon fiber and will wrap around magnets flywheel tomorrow and ship to Milo for machining i bought a static tire balancing at Harbor Freight it was in special ti $49 do you think it can be enought to balance with this unit.


Jean Prudhomme
                   
Probably but it should be dynamic balanced.

That is what the counter weights do in the two rotor.
Dynamic balance. A two rotor is in static balance without
the counter weights.

Paul Lamar