I bought this device in Walmart and it is intended for mixing
2 cycle oil with fuel for outboard motors.
It is marked in ounces and has a shut off valve built into
the base. The idea is you close the valve and pour the number of
ounces of 2 cycle oil in the funnel equal to the number of
gallons of fuel you just put in the tank. You then open the
valve and let it flow into the tank.
The sloshing of fuel in the tank during taxi and take off
will mix the 2 cycle oil with the fuel.
Paul Lamar
I got one of those at Wal Mart about two years ago...I thought I
told you all about it at that time! Guess not...or we're all
getting old and forgetful!
Works great...I use it every time I fill up the RX8. Also use it
to put motor oil in the Mazda's crankcase... keeps from spilling
any on top of the engine.
Harley
That message was for the new guys.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.