There seems to be more interest in this for aircraft use.
Some people I know are trying to implement Megasquirt
(I think) on some experimental aircraft using the traditional
air cooled aircraft engine.

It can be done but I am not comfortable with Megasquirt.
Currently it seems  it has evolved to be all things to all
car engines while the aircraft engine needs are more limited.

It also relies on feedback from an O2 sensor which does
not work well on 100LL. Yes I know there is a move afoot to
replace 100LL but that has been talked about for the last
ten years with no real movement. The lead emitted is a phony
issue and not a real problem.

The aircraft application needs more display of engine parameter
and historical data acquisition. In other words what is the engine
doing now and what was the engine doing for the entire flight.
In other words it needs to be combined with an engine monitoring
system.

Also Megasquirt is not well documented IMHO.
For example here is a so called flow chart of the main program.
What is missing in most cases is how, when and why.


    Set up Phase-Lock Loop, RTC, Serial, Interupts
    Initialization of Ports / Variables
    Sample MAP sensor and save as Barometer
    Copy Configuration and VE variables from Flash to RAM
    Copy Flash Burn Routine from Flash to RAM
Main Loop:
    Perform Table Lookup for Barometer and Air Density Correction
    Perform Table Lookup for Coolant and MAP Linearization
    Determine if in Fast-Idle Mode
    Compute RPM, Determine if Engine is Cranking or Running and Flood-Clear
    Calculate Warmup and After-start Enrichment
    Calculate Acceleration Enrichment/Enleanment
    Calculate EGO Enrichment
    Calculate VE from 2-D Table Interpolation
    Compute Total Enrichment Value (Accel, Baro, Air Density, EGO, and
Warmup)
    Compute VE Contribution
    Compute MAP/Baro
    Calculate REQ_FUEL
    Calculate Battery Voltage Compensation
    Calculate Final Pulse Width
 Goto [back to] Main Loop


Yes the info is there in the C source code but C is the fundamental problem.
One must be an accomplished C programmer to really understand what
is going on. I am not. There is a lot of controversy about this but IMHO
C is a terse and cryptic language. C was invented back in the days when one
used a teletype machine to talk to and program computers. That was 40 years
ago.
Computers are a million times smarter than they were in those days.
You should be able to tell the computer in plain English what you want it
to do. I am not saying voice recognition here. Just be able to type it in.

What do you think about this?

Paul Lamar


Paul,
There are software that are used to tune MS and can be used for
monitoring and data logging such as Mega Tune and Tuner Studio
and others.

Joe Berki
Limo EZ

Yes I know that but it does not IMHO justify writing the software
in cryptic C.

Paul Lamar