I am looking for these dimension from the flywheel 13-b RX-7 if someone
have one on hand uninstalled i would really appreciate those informations
see photo
Jean Prudhomme
Which dimensions?hole spacing?Diameter? Hole size?How exact do you
need... I happen to have one off the plane right now:-)
--
David Leonard
Dave you are insured. Sky Smith had the info on you. You are famous.
As far as I can tell you can fly the RV4 anytime.
Apparently two successful off airports counts for a lot :)
I need a medical and and bi annual. Both have recently expired. I got them
for flying in Oz.
Paul Lamar
Oh, that is Hilarious.I had no Idea they knew anything about my off
airport landings. I guess big brother is watching.Interesting.Yesterday
I also got word from them that they would cover me for the Air Races
(liability only) at no additional cost.
I was considering re-building my engine while I have the gear box off (1/3
of the removal work is done) because of the combustion gasses that are
getting into my cooling system.But instead I decided to give all the
tension bolts 1/8 turn and see if that helps anything.So far the problem
does not seem to be getting any worse and it is easy to check between
flights.
So my plane should be back together in time to fly yours later in the month.
--
David Leonard
Turbo Rotary RV-6 N4VY
http://N4VY.RotaryRoster.net
http://RotaryRoster.net
I have a couple of 13B blocks here Jim can use to check the alignment
of your gear box on. I also have a flex plate or two you can
replace for me later. I'll put a dial indicator on mine in
a day or two after I get Robin shipped off to the 99's conference
in Oklahoma.
Mazdatrix has a new drill jig for replacing the tension bolts
with half inch if that proves to be the problem.
Jeff may have made it for him.
10 mm is .393"
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.