Subject: Starter diode circuit - CORRECTED
From: Rotary Engine
Date: 7/18/2011, 10:00 AM
To: AAA Put this in the To box


Paul,

I checked the spike-catching circuit wired to my starter yesterday
and noticed that the diode lead was attached to the small spade
terminal, not the large battery lead as I had indicated earlier.  I
re-drew the schematic for your reference.  Sorry for any confusion
this may have caused.

Mark S. in TX


I thought that was the place to put it Mark. The solenoid acts like an
ignition coil when you release the starter, and can create 300 volts. The
diode lets that dissipate safely before it ruins electronics.

Dale Davies


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.