I stay in Pretoria, South Africa and look forward to start building my Cozy
4 in the next 4 to 6 weeks with a turbo rotory engine. I made contact with
rotary specialist, Karel from Rotrix in my home city Pretoria that import
and rebuild used rotory engines at reasonable prices. The configuration I am
considering is to use the single turbo 13b rotory with a back-up stock
computer contol fuel injection and ignition system modified to cater for the
lead content when aviation fuel is used. A custom built inlet manifold that
sufficiently lower the total height of the engine. The temperature oil valve
and standard sump with internal modification to cater for high G steep
turns. A standard alternator + extra small alternator with a double battery
electrical lay-out including a double fuel pump system. The Part of the
system I would like to get advice and comments on is the options for
reduction drives, belt or gear types with cost and potential risk and
maintenance motivation. I would also like to know if there is any Cad
drawings available for the rotory mounting cradle as well as a belt
reduction drive to enable me to get it locally manufactured.
Thank you for everybody's involvement in a very interesting Forum.
Barend de Beer
What rotary cradle are you referring too?
http://www.rotaryeng.net/motor.html
We are out of turbo manifolds. I recommend a P-port
for the turbo.
http://www.rotaryeng.net/intake.html
Real world Solutions sells gear boxes and injection computers.
http://www.rotaryaviation.com/
Beware of the stock turbo. It does not stand up to aircraft
use. At the very least you need a turbo tach kit to keep it
from over speeding at altitude and high boost.
Paul Lamar
Hi Barend
Bill Reeves is building a turbo rotary cozy in cape town.
http://www.zandvleitrust.org.za/art-cozy%20article%20bill%20building%202011.html
Regards
Pieter Saayman
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.