I stay in Pretoria, South Africa and look forward to start building my
Cozy
4 in the next 4 to 6 weeks with a turbo rotory engine. I made contact with
rotary specialist, Karel from Rotrix in my home city Pretoria that import
and rebuild used rotory engines at reasonable prices. The configuration I
am
considering is to use the single turbo 13b rotory with a back-up stock
computer contol fuel injection and ignition system modified to cater for
the
lead content when aviation fuel is used. A custom built inlet manifold
that
sufficiently lower the total height of the engine. The temperature oil
valve
and standard sump with internal modification to cater for high G steep
turns. A standard alternator + extra small alternator with a double
battery
electrical lay-out including a double fuel pump system. The Part of the
system I would like to get advice and comments on is the options for
reduction drives, belt or gear types with cost and potential risk and
maintenance motivation. I would also like to know if there is any Cad
drawings available for the rotory mounting cradle as well as a belt
reduction drive to enable me to get it locally manufactured.
Thank you for everybody's involvement in a very interesting Forum.
Barend de Beer
What rotary cradle are you referring too?
http://www.rotaryeng.net/motor.html
We are out of turbo manifolds. I recommend a P-port
for the turbo.
http://www.rotaryeng.net/intake.html
Real world Solutions sells gear boxes and injection computers.
http://www.rotaryaviation.com/
Beware of the stock turbo. It does not stand up to aircraft
use. At the very least you need a turbo tach kit to keep it
from over speeding at altitude and high boost.
Paul Lamar
Hi Barend
Bill Reeves is building a turbo rotary cozy in cape town.
http://www.zandvleitrust.org.za/art-cozy%20article%20bill%20building%202011.
html
Regards
Pieter Saayman
Hallo Paul
Thank you for all the info.
The info for the engine mounting is sufficient for the moment. Do you have
any links or info for the turbo tach kit that you refer to?
Thanks
Barend de Beer
http://www.turbobygarrett.com/turbobygarrett/
We spent two days installing the turbo tach in the compressor housing.
It was mostly a learning experience so the next one will go faster.
It is tricky to do. It required some expensive accessories for the Bridgeport
such as a sine plate not to mention a rare 6 mm .5 metric tap.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.