Hi Paul,
 How goes the cookie cutter for the Silicone Bushings? Tracy corrected me on
 the width.  It is properly 9/16 instead of 1/2.  I see that McMaster Carr's
 only go up to 1/2, so we should probably go with 2 sheets with adhesive and
 stick them together.

 If you haven't bought the Silicone yet, I will order it today and buy the
 cutters off you, then I will sell the left overs to anyone who wants them.

 Tracy shipped my drive today, so all I need is to machine my plate.  Is Jim
 offering to do it for me?  I can drive it up anytime this week (preferrably
 outside traffic hours), It also may just be worth while for me to get it
 done locally....  i hate that drive.

 --
 David Leonard

 Turbo Rotary RV-6 N4VY
 http://N4VY.RotaryRoster.net
 http://RotaryRoster.net


 Jim is working on the OD cutter tomorrow. We have the ID cutter and
 it works great.  I have enough for one damper plate so no need to order
 anymore just yet. We need to test this durometer and make adjustments
 if necessary.


 Paul Lamar

Eh, what happens on "test failure"?