Subject: nickel-silicon carbide alloy
From: Rotary Engine
Date: 7/27/2011, 7:13 PM
To: AAA Put this in the To box



Paul

Just saw an article in Hot Rod mag Sept issue. A very limited production V4 motorcycle engine designed by Katech Inc in Clinton twnshp Mich. Here's what caught my attention: the block is cast in 356-T6, and "The block uses no liners; the aluminum cylinders are plated with a thin film of nickel-silicon carbide alloy". Is this approach possibly usable in the often discussed aluminum side housings?

regards Robert

Quite common. It is called Nicasil and was invented by Maule.
Widely used by BMW, Porsche  and others.

Works best on a cylinder. Not so good on a rotor housing.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.