Subject: Mazda Single rotor lawn mower
From: Rotary Engine
Date: 7/28/2011, 11:56 AM
To: AAA Put this in the To box



 Solid running AUS Mazda single rotor package with goof application



http://www.youtube.com/watch?****v=nOjk9RCzg9Y<http://www.youtube.com/watch?**v=nOjk9RCzg9Y

<http://www.**youtube.com/watch?v=**nOjk9RCzg9Y<http://www.youtube.com/watch?v=nOjk9RCzg9Y

 Rob Woods

 A couple of observations and a question . . .

 1. These guys are prime candidates for the Darwin Awards. Of course,
 there are many that think endeavors in which we're involved would
 also mark us as candidates. Link below.

 http://www.darwinawards.com/

 2. The good thing about wearing a helmet without other safety
 equipment, is that it makes it much easier to visually identify the
 body after a catastrophic incident.

 My question is . . . Wonder how much hp this engine puts out? Maybe
 at least a hundred? Would love to have a fuel injected version of it
 for a home building project I'm contemplating.

 Cheers, JL

 I don't see them endangering anybody else but themselves.
 Not my biz nor should it be anybody else's IMHO.

 My guess is it is way less than 100 HP in that configuration.

 Paul Lamar



 When they are doing doughnuts, it sounds like a turbo spooling down.

 Dale Davies

 Speaking of one rotors...Randy, how is yours coming?

 This is the most compact and simple intake and exhaust system I have ever
 seen
 on any engine. The turbo is bolted to the block and the carb is
 bolted to the turbo. Probably well over 100 HP.


 Paul Lamar


It's coming along.  I replaced the alternator with something I can now
identify, but it involved new brackets and mods to the engine mount.  Then
the oil filter mount had to be redone and on and on.  I have the cowling
and
spinner about complete and the prop set up.  Maybe a test run this weekend
if
I get the time.

Randy

When am I going to get my 182 spinner back? :)

Paul Lamar


Any time Paul, sorry I've held on to it so long but haven't been out that
way in a while.  You going to be around the hanger the next few days?  I
have to get out there for my Bi anual flight review soon.
The one I made from yours came out better than I expected,  It's really
light.
Randy


I'll be out there in the after noon most days. If I am not there just
leave it next door with Jim or on the other side with Colby or Haley.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.