Subject: nickel-silicon carbide alloy
From: Rotary Engine
Date: 7/28/2011, 7:38 AM
To: AAA Put this in the To box

Paul
Just saw an article in Hot Rod mag Sept issue. A very limited   production
V4 motorcycle engine designed by Katech Inc in Clinton twnshp Mich.  Here's
what caught my attention: the block is cast in 356-T6, and "The block uses
no liners; the aluminum cylinders are plated with a thin film of
nickel-silicon carbide alloy".  Is this approach possibly usable in the
often discussed aluminum side housings?

regards Robert


Quite common.  It is
called Nicasil and was invented by Maule.  Widely used by BMW, Porsche and
others.  Works best on a cylinder.  Not so good on a rotor housing.

Paul Lamar



Lest anyone get confused, I believe it's Mahle, the German automotive
manufacturer, not Maule, the bushplane maker.. Mahle now owns Clevite..



Matt-


Correct Matt. Thanks.


Paul Lamar


Hello,

The Nikasil process was developed by Mahle for NSU - yes there is a Wankel
(rotary) connection - http://en.wikipedia.org/wiki/Nikasil

Regards,
Chandra


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.