Subject: Taxied the RV4 for a mile
From: Rotary Engine
Date: 7/29/2011, 3:31 AM
To: AAA Put this in the To box


 It was 85 F to 90 F and I taxied the RV4 up
 and down the length of the runway twice.
 Tarmac temperature was 114 F.
 The engine coolant never got over 160 F! I am amazed.
 Mike Wills did everything right. The cooling duct/diffuser
 shields the rad from engine heat.

 Taking the slack out of the rudder cables where they link to
 the tail wheel also worked very well. The RV4 responded to the
 slightest movement of the rudder pedals. We had a strong
 gusty cross wind today.

 Paul Lamar

Nice Paul,

That is what you need.  A lot of time in taxi. I bet it felt great!!!

If the cooling system does not cool well on the ground, it wont work in
flight.  Forget about the idea that things will get better when we start
moving forward... they wont.  Temps on the ground will be cooler than
temps
on climb out, and about the same as temps in level flight.
-- 
David Leonard

Turbo Rotary RV-6 N4VY
http://N4VY.RotaryRoster.net
http://RotaryRoster.net

Hi  Paul, Has your Prop a backwards curve in the blade or is that
optical thingmey like the gunsight? Good luck with the flying when you
get around to it!!!
    John Burey.

Yes it does. In theory that captures the wasted span wise flow.

We have a few FAA and insurance  paper work hoops still to jump through before Dave or I can legally fly it.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.