Subject: Taxied the RV4 for a mile
From: Rotary Engine
Date: 7/29/2011, 7:39 AM
To: AAA Put this in the To box


It was 85 F to 90 F and I taxied the RV4 up
and down the length of the runway twice.
Tarmac temperature was 114 F.
The engine coolant never got over 160 F! I am amazed.
Mike Wills did everything right. The cooling duct/diffuser
shields the rad from engine heat.

Taking the slack out of the rudder cables where they link to
the tail wheel also worked very well. The RV4 responded to the
slightest movement of the rudder pedals. We had a strong
gusty cross wind today.

Paul Lamar

Nice Paul,

That is what you need.  A lot of time in taxi. I bet it felt great!!!

If the cooling system does not cool well on the ground, it wont work in
flight.  Forget about the idea that things will get better when we start
moving forward... they wont.  Temps on the ground will be cooler than temps
on climb out, and about the same as temps in level flight.

-- David Leonard

Turbo Rotary RV-6 N4VY
http://N4VY.RotaryRoster.net
http://RotaryRoster.net

I expected the strong cross wind to have more of an effect.
The tail weight is quite heavy. I have not weighed it yet
but my guess is well over 100 pounds without me in it.
It is about all I can do to lift it off the hangar floor.
And that is with only 5 gallons per side.

If there is no slack in the cables the direction it points
is strictly a function of the rudder pedal/tail wheel position.

It was too hot to close the canopy and too windy with it open.

I need one of those WW I helmets with the flat plate goggles. :)

It is a bear to get it in and out of the hangar by myself.
There is a lot of load on the engine hoist casters so they
don't move very easily. The taxi way slopes up to the hangar
floor which is flat and horizontal. That means I have to push it
slightly up hill. I am thinking of shimming those steel channel rails so
they slope down instead of up. That way gravity will automatically
insert the airplane in the hangar :)

Paul Lamar

I bought one of the cheapest power winches from harbor freight, and fixed it to the floor at the back of my hangar with anchor bolts, added a lnger extension to the pushbutton control so it would reach to about 10 feet in front of the hangar. Powered it from the battery charger. Pulled the plane straight in over ice and snow.
C. Smith

Good idea. I'll take a look at what the have.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.