Dave, what is the status of the damper bushings?
I measured the durometer of the silicone bushings
and it was 80. Higher than I had expected.
Paul Lamar
Installed.
--
David Leonard
Turbo Rotary RV-6 N4VY
http://N4VY.RotaryRoster.net
http://RotaryRoster.net
Great. I can hardly wait to see how well they work or don't work.
Paul Lamar
--
What part of Dave's failure was attributed to the rubber bushings? Why the
desire to change to Silicone
Bill Schertz
KIS Cruiser #4045
N343BS
Phase one testing Completed
Signs of melting. A lot of energy goes into those rubber bushings.
Dave is right up there on the HP. My guess is around 250 HP or more.
Paul Lamar.
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.