Subject: Silicone rubber damper bushings.
From: Rotary Engine
Date: 8/11/2011, 11:10 AM
To: AAA Put this in the To box
CC: Tracy Crook <tcrook@rotaryaviation.com>, Tracy Crook gmail <rwstracy@gmail.com>


  Dave, what is the status of the damper bushings?
  I measured the durometer of the silicone bushings
  and it was 80. Higher than I had expected.

  Paul Lamar

  Installed.

  --
  David Leonard

  Turbo Rotary RV-6 N4VY
  http://N4VY.RotaryRoster.net
  http://RotaryRoster.net

  Great. I can hardly wait to see how well they work or don't work.

  Paul Lamar
  --


  What part of Dave's failure was attributed to the rubber bushings? Why the
  desire to change to Silicone

  Bill Schertz
  KIS Cruiser #4045
  N343BS
  Phase one testing Completed

  Signs of melting. A lot of energy goes into those rubber bushings.
  Dave is right up there on the HP. My guess is around 250 HP or more.

  Paul Lamar.


 If those work for Dave, I may be asking for a set for my P-Ported 20B.

 Mark

 With a 3 rotor you may be putting less energy into them.
 Smoother torque delivery.
 Have you seen any signs of melting so far?


 Paul Lamar



-- 
David Leonard

Turbo Rotary RV-6 N4VY
http://N4VY.RotaryRoster.net
http://RotaryRoster.net

not melting they were just falling apart. They are too thin.  Instead of 1/8
they should be made of 2 pieces of silicone, 3/8 and 3/16

Dave

You are talking about the new silicone bushings. Not the original black rubber bushings.

We can do that if you order the silicone material you would like to try
today so I have it by Monday. We have the cutting tools.

Or let me know what you would like to try and I will order it now.
All I have in stock is the 1/8th. How soon after you glued them
did you run the engine?

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.