Paul,
           Re  EGT and AFR gauges/ sensors.  Does it make sense to put these gauges on each rotor or simply have one between the two?    What EGT sensor will stand the heat of the rotary?    Finally 99% finished the motor hardware and now painting all bits for final assembly. That leaves the wiring!  Neil.


It is nice to have one for each rotor. If the pipes are separate for a distance
they can be a foot or so away which makes it a bit easier on them.

This outfit has the worlds largest collection of sensors.

http://www.omega.com/temperature/tsc.html

Paul Lamar