Hey guys no need for FACEBOOK..
Help us save the RE by going to this link:
http://savetherotary.**rotarynews.com/<
http://savetherotary.rotarynews.com/
We are trying to get 10k messages to Mazda in a week or so. FB and
TWITTER are just a few of the tools we are using to help us get
there. We're at 4k now in just a few days!
Since Dan & I heard of the demise of the Rotary at Mazda last week,
we decided to give the enthusiast and consumer a voice via this effort.
So please help SAVE THE ROTARY by posting your input and thoughts,
and what the RE has meant to you at:
http://savetherotary.**rotarynews.com/<
http://savetherotary.rotarynews.com/
Thanks,
-Berny & Dan
http://rotarynews.com/
I do not see Mazda dropping the rotary engine just yet. They likely will
drop
the RX8 and introduce a new model. I think if they put a rotor in the
Shinarai
with a smaller rotor on the front and two rotor 16X that starts for
acceleration and hills as Paul describes with a turbo compound on the small
engine would sell. Sharp looks, fuel economy and power with Mazda's
handling.
Can not see that going wrong.
Dale Davies
Dale,
As I see it, the real problem with the rotary is the public's negative
perception regarding the rotary engine's reliability. Obviously, we're not
in that group. But I constantly have people asking about the "apex sealing
problem". Of course, I tell them that the apex seal problem was solved
decades ago, but they continue to ask. Also, the RX-8's got a lot of bad
press as a result of the starting/flooding problems early on. Most people
aren't willing to gamble their hard-earned dollars on a car with a rotary
engine.
Mark S. - Austin, TX
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.