Hey guys no need for FACEBOOK..
Help us save the RE by going to this link:
http://savetherotary.**rotarynews.com/<
http://savetherotary.rotarynews.com/
We are trying to get 10k messages to Mazda in a week or so. FB and
TWITTER are just a few of the tools we are using to help us get
there. We're at 4k now in just a few days!
Since Dan & I heard of the demise of the Rotary at Mazda last
week, we decided to give the enthusiast and consumer a voice via this
effort.
So please help SAVE THE ROTARY by posting your input and thoughts,
and what the RE has meant to you at:
http://savetherotary.**rotarynews.com/<
http://savetherotary.rotarynews.com/
Thanks,
-Berny & Dan
http://rotarynews.com/
I do not see Mazda dropping the rotary engine just yet. They
likely will drop the RX8 and introduce a new model. I think if
they put a rotor in the Shinarai with a smaller rotor on the front
and two rotor 16X that starts for acceleration and hills as Paul
describes with a turbo compound on the small engine would sell.
Sharp looks, fuel economy and power with Mazda's handling. Can not
see that going wrong.
Dale Davies
Dale,
As I see it, the real problem with the rotary is the public's negative
perception regarding the rotary engine's reliability. Obviously,
we're not in that group. But I constantly have people asking
about the "apex sealing problem". Of course, I tell them that the
apex seal problem was solved decades ago, but they continue to ask.
Also, the RX-8's got a lot of bad press as a result of the
starting/flooding problems early on. Most people aren't willing to
gamble their hard-earned dollars on a car with a rotary engine.
Mark S. - Austin, TX
To the American consumer, perception is reality. Ask the typical
consumer about diesel engines. They will say: Olds diesel, 1985.
They think development stopped then. Most auto mfgs. have opted for
hybrids in the US because they have a better "image" than diesels and
they don't want to spend the time or dollars to change public
opinion. Sad state of affairs. jd
Mark,
You are correct on the perceptions that are carried for decades. The RX8
problems get into the view also. A lot of that is because the rotary engine is
different. Ask someone with a Ford more than three years old if they had spark
plugs "broken" off in the head. The older 16mm plugs could get the end stuck
and not come out with the rest of the plug if you did not service them and
anti-seize them every 50,000 miles. Just about all manufacturers have had
problems. Look at the 4.1L Cadillacs. Ford trucks and
Cadillacs everywhere.
jd,
The old Nissan King Cabs with a diesel lost favor. People did not use them for
what diesels are good for. They would drive short distances and let them cool
off. A few years of that with extended oil changes and they became gross
polluters, either burning oil or puking out black smoke at every hill or time
they accelerated.
It all boils down to educating the public on the proper use and maintenance of
their auto. How many read their owners manual when they buy a new car?
Probably easier to count the ones that do read it.
Do note John's comment about working on future tech and not wanting to let the
cat out of the bag.
If Mazda produced the Shinarai with a rotary under the hood with a system like
Paul has proposed, I would have to run out and buy one. Make it '73 Espace
blue like my RX3 Coupe' was.
Dale Davies
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.