Subject: New rubber coupler and flex plate Rev2
From: Rotary Engine
Date: 8/27/2011, 7:09 PM
To: AAA Put this in the To box

All,

I found this awesome basic article on dampers, mostly for crankshaft
engines, but info on viscous dampers, terminology, and a lot of
insight on the topic in general.  I am going to email them to see if
they might be interested in rotaries.

Gene Kahn

Remember! We are not concerned with the torsional resonant frequency
of the e-shaft. It is just not a problem in rotaries.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.






On Aug 27, 2011, at 2:15 AM, Rotary Engine wrote:

I made the coupler smaller in diameter to reduce the polar moment
of inertia and gyro reaction stress. The 4130 rectangular
tubes are off the shelf at AC Spruce. The advantage of
this design is: everything can be changed if necessary.
For example if the main 4130 plate cracks the thickness
can be increased in later version.

It does not depend on a proprietary part that could
be discontinued at any time. I will build one some time
this year.

Paul Lamar


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.

<New-damper1-Rev2.jpg><New-damper2-rev2.jpg>