Subject: New rubber coupler and flex plate Rev2
From: Rotary Engine
Date: 8/27/2011, 7:20 PM
To: AAA Put this in the To box


 I made the coupler smaller in diameter to reduce the polar moment
 of inertia and gyro reaction stress. The 4130 rectangular
 tubes are off the shelf at AC Spruce. The advantage of
 this design is: everything can be changed if necessary.
 For example if the main 4130 plate cracks the thickness
 can be increased in later version.

 It does not depend on a proprietary part that could
 be discontinued at any time. I will build one some time
 this year.

 Paul Lamar

I am really starting to like this design.  Can you have it to me by reno?
:-)

-- 
David Leonard

Turbo Rotary RV-6 N4VY
http://N4VY.RotaryRoster.net
http://RotaryRoster.net

Are you kidding? It takes a couple of weeks just to get the 4130 steel
laser cut:) Then I have to get it in the tig welding shop
for another couple of weeks. Reno is two weeks away and then
we would have to test fly it first.

BTW I got the radio working today in the RV4. Both transmitter and receiver.
The VSWR is less than 2 at 122.9 MHZ. Works great.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.