There is the link Paul

 http://www.youtube.com/v/**WgdIE2t8QkM<http://www.youtube.com/v/WgdIE2t8QkM
?

 By the way i did have my housing made at the foundry in 356T6 and i should
 get 2 sets by this week. They charged me $110.00 per set. It look a very
good
 price to me.

 You shown in the past some mold for the side port inlet and
 several peoples want it and you mention your foundry supply was to
 expensive may be if you are interested i can put yourself on contact
 with them they are located south of Tampa Fl,


 Jean Prudhomme

 That link is still not working Jean.

 Sounds like a good price on castings.
 We are not going to do any more side port intake castings.
 P-ports are easier and cheaper and they make more power. They are also
easier
 to tune as the manifold pressure tap is always in the same
 place.

 Paul Lamar


i TI try by the return of your e-mail and it work fine


Jean Prudhomme

Still does not work for me. What are the youtube key words?
What is the youtube subject?


Paul Lamar


Maybe this link will get you to something that will get you to Utube.  It's
pretty amazing video.  http://www.jetman.com/

Van Vannoy

That works fine.

Paul Lamar