I made the coupler smaller in diameter to reduce the polar moment
of inertia and gyro reaction stress. The 4130 rectangular
tubes are off the shelf at AC Spruce. The advantage of
this design is: everything can be changed if necessary.
For example if the main 4130 plate cracks the thickness
can be increased in later version.
It does not depend on a proprietary part that could
be discontinued at any time. I will build one some time
this year.
Paul Lamar
I am really starting to like this design. Can you have it to me by reno?
:-)
--
David Leonard
Turbo Rotary RV-6 N4VY
http://N4VY.RotaryRoster.net <
http://n4vy.rotaryroster.net/
http://RotaryRoster.net <
http://rotaryroster.net/
Are you kidding? It takes a couple of weeks just to get the 4130 steel
laser cut:) Then I have to get it in the tig welding shop
for another couple of weeks. Reno is two weeks away and then
we would have to test fly it first.
BTW I got the radio working today in the RV4. Both transmitter and
receiver.
The VSWR is less than 2 at 122.9 MHZ. Works great.
Paul Lamar
I made a scale dwg showing the counter weight, PSRU adpater plate and
rubber coupling.
Here it is. The last attached jpg.
There is not a lot of room for an outboard style alternator/CD ignition
system on the front or back of the flex plate but it might be nice to have
that all in the same package.
I have an idea. Let's see how it develops.
Paul Lamar
------------------------------**----------------------
Here it is. I recessed the rubber coupling back into the 4130 flex plate
and eliminated the aluminum spacer between the counter weight and the old
flat 4130 flex plate. We will need a jig to hold everything in place
to weld this up. One less part no less and shorter bolts.
There will be some minor trimming required on the Ford splined device as
well.
This made room for a Harley type alternator in front of the flex plate.
The Harley version will require a battery to ignite the RX8 coils.
Some outboard stators and magnet wheels will also probably fit.
The outboards type are truly a best bet as no battery would be required.
The high voltage coils charge one or more capacitors and they are
discharged to
fire the plugs. With a high wing airplane to feed the fuel and a carb no
battery
or separate alternator at all would be required.
You would still have 40 amps or so for lights etc.
Paul Lamar
Paul, With the stock flywheel spacer deleted there now appears to be no
place for the pilot bearing which centers the PSRU input shaft. That might
cause problems with the PSRU oil seal in the adapter plate and sun gear
centering in the planetary carrier.
george grimes
No it is still there. Not shown on the dwgs yet.
BTW I forget to mention the ring gear is still in the right position
so no need to move the starter.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.