How many people on here have Tracy's EM2 system to go along whith their ECx
system?

Paul Lamar

I have both the EC2 along with the EM2.  As well as the RD-B

Chris Barber
Houston

I have one too as well as Ed Anderson's EFISM.
Combined almost too many options for me to handle :)

Paul Lamar

I have all of Tracy's equipment. RD-C, EM2, EC2. Havent flown yeet but had
done some taxi test.

Bob Mears

I've got all his stuff- EC2, EM2, RD-1C(2.85/1)

Brian Trubee

Can you set up a movie camera to read your Em2 Brian?
I would like to see what I can expect with the RV4.

Paul Lamar


I also have all of Tracy's systems, EM2, EC3 & RD-1C.

Bob Forbes

How is it coming Bob? Flying yet? Any recent engine installation
pictures?


Paul Lamar

Ok, I'll set a up a camera to tape my EM2 on my next flight.

Brian Trubee

 I am currently building (not flying) an aerocanard with a renesis engine
(prior to this I built a dragonfly with a norton/midwest rotary)

I am using tracy's RD1-C with the ec-3 and em-3. The em3 has a data storage
and playing capacity. I am also using a Skyview ems which also has a data
logging capability. Because of all of the sensor possibilities, I will have
multiple thermocouples giving me all kinds of under-cowl data,
temperature-wise.

Since there are 3 exhaust ports, I will use the two outward ones for talking
to the EM3 and the middle for talking to the skyview. Each of the other
parameters are sensed with individual sensors (2 per parameter) and sent to
the appropriate black box.

I am doing my cowling at this point.

When running/flying, I will try to transmit appropriate data, possible
pictures, down the line.


Rich