Paul I received the casting for the housing and i send you the shaft design,i should start the
machining soon and lot of material will be removed from the cast,i read the last e-mail about an
other suggestion for the damper, you can use the Tracy housing and beefee up and get it cast by the
foundry here in Florida they are very low cost.With my housing, i do have enought space for this
suggest damper because i was looking to tig spot welding a ring at the outher side of the ring gear
at the snap ring size
Jean Prudhomme
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.