Hi, a soft mount for the ring gear is an excellent idea, I thought of it
years ago. Found out that R-R used it in their Eagle of 1918.
Murry I Rozansky
Here is a Rhino 3D dwg hot off the press.
The advantage over the R-R is silicone rubber.
Paul Lamar
Paul,
Have you looked at the use of polyurethanes in place of rubber?
The advantage of PU is that they can be formulated to give any shaw hardness
Required, should be easy to change the bushes from very soft to hard, much
better than trying to find the grade of rubber in the size and shape.
You could have a number of sets of bushes made with different grades of
material with varying grades of shaw hardness.
The tooling should not cost a lot as the PU is cast in simple moulds, here
there are companies that make PU replacement kits for car rubber suspension.
My other suggestion would be to make the PU or rubber bushes circular in
place of rectangular which would simplify the construction of the flywheel
and driven , also have you considered putting the damper material in
compression in place of shear as drawn.
Geoff
Cheshire
England
I don't think it has the temperature resistance of silicone rubber.
As I recall polyurethane is only good to 200 F or so while silicone is good
to 400 or 500 F.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.