Here's a thought Mazda is pretty much committed to doing a RX 9 on the next
gen MX-5 chassis what if you did a Mazda speed version. stretch the chassis
a couple of inches to do the three seat configuration from the concept car. do
p-port intake side exhaust a turbo charger mounted down stream from the
manifold etc, you can do this because you would be using your hybrid motor
for low speeds.The fact you would be using all the latest tech
adopted to the three rotor and not using it at all at low speeds and ideal
stands a good chance of getting it past the EPA.

clifton younger


Where did you read that information?

The Mazda rotary has no problem passing the EPA smog rules.

What hybrid motor?

Paul Lamar