When I first saw Bud Warren's centrifugal clutch something in the back of
mind was trying to tell me he did not build it.
The parts looked too slick and too finished to be custom made.
I think I figured it out. They are stock parts out of Center Force clutches.
Of course Bud never talked about that.
http://www.centerforce.com/clutches.tpl?subsection=clutchtypes#
Ironically I have one in my my RX8. I love it. It works great.
This will solve the gear box chatter problem if set up properly.
The question is how thick must be the flywheel? That will affect the over
all weight.
BTW I don't think it was the cause of Bud's fatal crash.
Paul Lamar
------------------------------------------
I always admired Bud's design and tried to convince him to make one for the
rotary. He wouldn't hear of it. Couple his clutch to the sun gear and make
hydraulic prop accommodations and it would be a winner.
Marc Wiese
Yes it is too bad he did not. We would then have an excellent
data point to go forward. The spur gear design however does
not fly in my book as a planetary line contact length is
six times longer, six times stronger and twice as heavy all
other things being equal. We have lots of examples of
that.
Line contact is what does in the cam and lifters of a putt putt bang bang.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.