A few words of encouragement toward purchasing a used rotary engine.
This past weekend I went to look in a local Pick-Your-Part self serve auto
wrecker for a rotary engine. Every couple months PYP has a 4 day 1/2 off
sale, and this was the time. About 15 years ago I would see maybe 30 early
rx7 sitting in there, usually undamaged. Not so today. There were two rx7
this past weekend, an 85 with a 12a, and an 89 13b.
Both cars had been in there perhaps 3 weeks, without any major parts
removed. I was hoping to find an 84-85 rx7 13b because I wanted the rotor
housings for my rx8 engine, as this year has the seal grooves on the
housings like the rx8. I settled for the 89, and after 2.5 hours had the
engine sitting on the ground under the car. Being it was, the end of the
day, I left it for the next morning when I returned to strip it down to the
bare block. After loading it on my two wheel hand truk, I took it to the
payment window where they sold it to me as a "short block" because they
could see there were no heads:)
The cost of the engine was $60 plus $35 core charge and tax.
The engine turned over easily by hand with the flexplate. Back at the
garage, I did compression tests:
bump test: 105 psi front and rear.
thumb test top plug holes: no uneven pulses
static compression: 115psi front and rear.
The 89-91 engines use 9.7 compression ratio.
I tested my 04 rx8 engine and the results were identical.
I brought PYP some dead subaru engine remains to get my core charge back.
Ed Carver
Heck stick it in the airplane and fly it :)
Not worth over hauling. It won't get any better than that.
Paul Lamar
And I thought only Australians were thieves!!! Neil.
Well, no, the brits brought some of their undesirables to the state of
Georgia as well. So oz was'nt the only prison colony. I don't think there
were any Lamar's there though, the Lamar's are French persons? Or so I
thought until I saw some of them in Blyth recently;)
Ed Carver
I am only partly French. There is also Italian, American Indian and German blood.
Their grandmother was Canadian. All six of my grandchildren live
in Canada. I'll probably be a great grandfather soon as one of my grandchildren
has recently married. I started early :)
Paul Lamar