I hitched a ride with Dave in his RX7 turbo II rotary powered RV6.
Here we are at 12,600 feet over the Sierra pass at 162 Kts or 183 MPH
true airspeed.
Just cruising at only 5480 RPM. Rather quiet and very smooth with
head sets on. This is the same airplane that went 229 MPH
around the pylons at Reno a couple of days ago.
8 gallons an hour or 23 MPG.
The cowl flaps closed gave 3 or 4 Kts
at the expense of 5 or 6 degrees C higher oil temp.
From about 69 C to 74 C. Excellent trade off.
Don't know on the water temp change as that was not working properly.
We stopped over night at Mammoth. Dave dropped me off in front
of my hangar door at SZP. Thanks for the ride Dave.
Paul Lamar
Dave,
What RPM were you running at the 229MPH speed? What is the ratio of the
borrowed PSRU? It looks like you may need a complete new gear box. If so
are you thinking of running the 2.85 unit?
Dale Davies
Hi Dale,
I was seeing max RPM of about 7000 to 7300 depending on g-load and location
on the course, and up to 7500 briefly coming down the "chute." That still
puts my tips in the low 900 fps range which is about right for racing. I
still have the 1B gear box. Cant change because I built-in an engine
off-set.
--
David Leonard
Turbo Rotary RV-6 N4VY
http://N4VY.RotaryRoster.net
http://RotaryRoster.net
Paul, Loved the pictures. I'm envious, in a good way. BTW, has anyone ever
suggested posting pictures to a photo sharing service like 'Flicker' or
'Picasa'? Not only would it save bandwidth, but it would greatly facilitate
sequential viewing of pictures posted. Cheers, JLM
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.