Subject: Coming home from Reno
From: Rotary Engine
Date: 9/21/2011, 3:53 AM
To: AAA Put this in the To box


   I hitched a ride with Dave in his RX7 turbo II rotary powered RV6.

      Here we are at 12,600 feet over the Sierra pass at 162 Kts or 183
      MPH true airspeed.

      Just cruising at only 5480 RPM. Rather quiet and very smooth with
      head sets on. This is the same airplane that went 229 MPH
      around the pylons at Reno a couple of days ago.

      8 gallons an hour or 23 MPG.

      The cowl flaps closed gave 3 or 4 Kts
      at the expense of 5 or 6 degrees C higher oil temp.
      From about 69 C to 74 C. Excellent trade off.

      Don't know on the water temp change as that was not working
 properly.

      We stopped over night at Mammoth. Dave dropped me off in front
      of my hangar door at SZP. Thanks for the ride Dave.

      Paul Lamar

     Dave,

      What RPM were you running at the 229MPH speed? What is the ratio
   of the  borrowed PSRU? It looks like you may need a complete new
   gear box. If so  are  you thinking of running the 2.85 unit?

     Dale Davies

   Hi Dale,
   I was seeing max RPM of about 7000 to 7300 depending on g-load and
  location
   on the course, and up to 7500 briefly coming down the "chute."  That
   still puts my tips in the low 900 fps range which is about right for
   racing.  I still have the 1B gear box.  Cant change because I built-
   in an engine off-set.

   --
   David Leonard

   Turbo Rotary RV-6 N4VY
   http://N4VY.RotaryRoster.net
   http://RotaryRoster.net

  Hi Dave,

   I was just curious. That darn thinking thing again. You've heard the
  song?
  Any way, a p-port Renesis with turbo would add a bunch of power.
  Especially if
  you could run the engine a little faster.

  Dale Davies


  We have a problem before we can do that. Dave has about 250 HP when
 he is
  running about 45 inches of Hg. With a p-port my guess that would go
  to about 300 HP. Dave has done nothing on drag reduction so far.
  I can get to 300 HP NA if I go up to a 3.17:1 and turn 8000 to 9000
  RPM with a p-port. The red line on the RX8 engine is 9000 RPM.

  Both Dave, I and others. RV tail flutter. We agree on this. To go faster
  than 230 MPH we need to fix the tail first.

  We spoke to an expert on this RV4 RV6 problem at Reno.

  Consequently I am in the process of redesigning the vertical and rudder
  in carbon fiber to make it stronger and stiffer without adding any
  weight.
  I spoke to the people in Oxnard today that built the Kis and a
  lot of other aircraft like early Lancairs. They have an oven and vac bag
  facilities. They agreed to do it. For some strange reason you do not
 hear
  about flutter on composite airplanes. At least I have no heard about it.

  I also consulted with my carbon fiber expert Alex Kozlof this morning.
  Alex and his son won the Little America cup race in a carbon cat Alex
  designed.
  Alex is also a distributor of uni carbon and a pilot. More on this
 later.

  Paul Lamar


   Paul,
               That picture of the mountains you show is that the pass
 ahead? if so I would not like to be flying there with a bit of low
 cloud, and was that at 12,000ft.?
    lucky duck to get to fly there:-P
               John Burey.

 Yosemite pass is a bit north of where we went through. That is the
 picture with
 the clouds and big rock called El Capitan.
 http://www.nature.nps.gov/air/WebCams/parks/yosecam/yoselargerimage.cfm


 We went through Mammoth mountain pass at 12,500 feet and stayed there
 as there is another 10,000 foot  mountain range North of SZP. Here is a google
 map.  Besides that you go faster with a turbo and get better MPG.
 BTW the turbo also climbs very well at 12,500 feet.

 Paul Lamar

     Hi  Paul,
                    As you would know here in OZ. @ 12,500ft you are
already 5,500 ft ABOVE everything with rocks in it here. It's on my
bucket list to get to the Rockies. We have these here.
                    John Burey

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.