Subject: Coming home from Reno
From: Rotary Engine
Date: 9/22/2011, 3:09 AM
To: AAA Put this in the To box


 I hitched a ride with Dave in his RX7 turbo II rotary powered RV6.

    Here we are at 12,600 feet over the Sierra pass at 162 Kts or
 183   MPH true airspeed.
     Just cruising at only 5480 RPM. Rather quiet and very smooth with
    head sets on. This is the same airplane that went 229 MPH
    around the pylons at Reno a couple of days ago.
     8 gallons an hour or 23 MPG.
     The cowl flaps closed gave 3 or 4 Kts
    at the expense of 5 or 6 degrees C higher oil temp.
    From about 69 C to 74 C. Excellent trade off.
     Don't know on the water temp change as that was not working
   properly.
     We stopped over night at Mammoth. Dave dropped me off in front
    of my hangar door at SZP. Thanks for the ride Dave.
     Paul Lamar


   Dave,
     What RPM were you running at the 229MPH speed? What is the ratio
 of the  borrowed PSRU? It looks like you may need a complete new
 gear box. If so  are  you thinking of running the 2.85 unit?
    Dale Davies

 Hi Dale,
 I was seeing max RPM of about 7000 to 7300 depending on g-load
 and   location    on the course, and up to 7500 briefly coming down
 the "chute."  That    still puts my tips in the low 900 fps range
 which is about right for    racing.  I still have the 1B gear box.
  Cant change because I built-    in an engine off-set.
  --
 David Leonard
  Turbo Rotary RV-6 N4VY
 http://N4VY.RotaryRoster.net
 http://RotaryRoster.net


 Hi Dave,
  I was just curious. That darn thinking thing again. You've heard
 the   song?   Any way, a p-port Renesis with turbo would add a bunch
 of power.   Especially if   you could run the engine a little faster.
 Dale Davies
 We have a problem before we can do that. Dave has about 250 HP
 when  he is   running about 45 inches of Hg. With a p-port my guess
 that would go   to about 300 HP. Dave has done nothing on drag
 reduction so far.   I can get to 300 HP NA if I go up to a 3.17:1
 and turn 8000 to 9000   RPM with a p-port. The red line on the RX8
 engine is 9000 RPM.
 Both Dave, I and others. RV tail flutter. We agree on this. To go
 faster   than 230 MPH we need to fix the tail first.
 We spoke to an expert on this RV4 RV6 problem at Reno.
 Consequently I am in the process of redesigning the vertical and rudder
    in carbon fiber to make it stronger and stiffer without adding any
    weight.
    I spoke to the people in Oxnard today that built the Kis and a
    lot of other aircraft like early Lancairs. They have an oven and
 vac bag   facilities. They agreed to do it. For some strange reason
 you do not  hear   about flutter on composite airplanes. At least I
 have no heard about it.
 I also consulted with my carbon fiber expert Alex Kozlof this morning.
    Alex and his son won the Little America cup race in a carbon cat Alex
    designed.
    Alex is also a distributor of uni carbon and a pilot. More on this
   later.
 Paul Lamar


  Paul,
     That picture of the mountains you show is that the pass
   ahead? if so I would not like to be flying there with a bit of low
   cloud, and was that at 12,000ft.?
  lucky duck to get to fly there:-P
     John Burey.

   Yosemite pass is a bit north of where we went through. That is the
   picture with
   the clouds and big rock called El Capitan.

http://www.nature.nps.gov/air/WebCams/parks/yosecam/yoselargerimage.cfm

   We went through Mammoth mountain pass at 12,500 feet and stayed there
   as there is another 10,000 foot  mountain range North of SZP. Here
 is a google  map.  Besides that you go faster with a turbo and get
 better MPG.  BTW the turbo also climbs very well at 12,500 feet.

   Paul Lamar


    Hi  Paul,
      As you would know here in OZ. @ 12,500ft you are
 already 5,500 ft ABOVE everything with rocks in it here. It's on my
 bucket list to get to the Rockies. We have these here.
      John Burey


 Here we have Bambies (not Barbies) that jump out in front of you like
your
Roos do.
 Rockies are great. When you come, put time to see Takakkaw Falls. It
is a bit
west of Lake Louise. Great cougar population, but they are elusive.
Unless
looking for the two legged variety.  :-)))

Dale Davies


 Hi,
        I guess the two legged Cougars are more sneaky and more
dangerous than the four legged kind, I saw some moose? just off the side
of the road coming back from Williams Az. to Cal. a few years ago, very
elusive. Back to rotary engines the example of the "monster rotary" is
the kind of thing I was talking about some months ago, I feel that some
smart people who can write programs for CAD/CAM, should find building a
rotary very simple compared to say a V8 alloy engine, crankshaft,
camshaft, lifters, pushrods, heads, valves, ect.,ect.,ect. we just need
someone smart to apply their mind to the job.
   John Burey
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.