Subject: oil pressure pipe size on engine, 3rd gens
From: Rotary Engine
Date: 9/23/2011, 2:00 AM
To: AAA Put this in the To box


Dave Leonard tells me his VDO pressure sensors are not living more
than 20
hours so he is replacing them with a mechanical oil pressure gage.
Needless to say the oil pressure is critical to the life of the engine as
well as Tracy's gear box.

These are AN -3 brake lines but they will work as a reliable and
robust oil
pressure gage connections for  a MC Master
1.5 inch OD oil pressure gage. Yes one and a half inch outside
diameter oil
pressure gage.

https://www.pegasusautoracing.com/productselection.asp?Product=3

You will need a jic steel NPT 1/8th pipe adapter to the gage and to
the -4
an line.

We are not happy with the automotive oil pressure gage and it's nylon
lines
that are in there now.

Paul Lamar
--
Paul,
Are you familiar with the trouble almost ALL 3rd gen 13Brew engines
had with
their oil pressure senders/gauges? I've had 4 fail. Remote mounting is
one
answer (with good grounds). Also aftermarket senders don't seem to be
up to
the start up pressure and leak soon after new.  I always have a back
up oil
pressure gauge in my rew's.
Also, the threads on the block are something odd.
Marc Wiese

I think those threads are 1/8th NPT. That seems to work.
Larry Child looked at the sender and instantly recognized 1/8th NPT.
I assumed it was metric but no.... it is 1/8th NPT.

The high start up pressure was the reason I choose a 200 PSI gage.

Paul Lamar

------------------------
Paul,
The 3rd gen engines use an oil pressure thread on the block of 1/8
BSP, not
NPT----confirmed.

Marc Wiese

We have a second gen engine. BSP are straight threads therefor they
require
a sealing washer or O ring. I have never seen that on a 2nd gen engine
oil
pressure sender.

If it was a BSP we got all the way home with an 1/8th NPT screwed in.
I guess
we lucked out. I think the slightly larger steel 1/8th NPT probably
formed its own threads
in the cast iron. Of course max psi is only about 90 psi warm so the
force on the fitting is
about 45 pounds. When you screw in a 1/8th NPT the thread is tapered
and the torque
normally increases so I am sure one can be fooled. The first couple of
turns go easy.

Are VDO pressure sensors available in BSP?

Any way here is some more info on the subject.

http://pipeandhose.com/node/2

"NPT/NPS and BSP threads are not compatible due to the differences in
their thread forms, and not just the fact that most diametrical sizes
have a different pitch. NPT/NPS threads have a 60° included angle and
have flattened peaks and valleys (this is a Sellers thread form); BSP
threads have a 55° included angle and have rounded peaks and valleys
(this is a Whitworth thread form)."

Dave will have to run a 1/8th NPT tap in there the next time he has
the engine apart
or figure a way to deal with the chips when the engine is fully
assembled. One way
to deal with the chips is to stuff a grease soaked string all the way
down the gallery hole
and pull it out after taping.

Here is a dwg of the 1986 oil system.

BTW Pegasus has 1/8th BSP to 1/8th NPT adapters if one wants to go
that route.

www.Pegasusautoracing.com

Of course all this has nothing to do with the pressure sensor living
or dying.

Paul Lamar

No idea why the oilP senders are dying early - cold start (<32F)
pressure spikes???

The BSPT is 1/8-28  British Standard Pipe Tapered.
It is probably 1/8-28 JIS.

Not sure if it is the same as BSPT.
I have heard it called JSPT.
I know people who have threaded in 1/8-27 NPT and got away with it - it
leaked for others.
There are adapters to 1/8NPT, but I have seen housings where none of the
above fit - they get re-tapped ;)

Cheers
Cary



-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.