Dave Leonard tells me his VDO pressure sensors are
not living more than 20 hours so he is replacing
them with a mechanical oil pressure gage.
Needless to say the oil pressure is critical to the
life of the engine as well as Tracy's gear box.
These are AN -3 brake lines but they will work as a reliable
and robust oil pressure gage connections for a MC Master
1.5 inch OD oil pressure gage. Yes one and a half inch
outside diameter oil pressure gage.
https://www.pegasusautoracing.com/productselection.asp?Product=3
You will need a jic steel NPT 1/8th pipe adapter to the
gage and to the -4 an line.
We are not happy with the automotive oil pressure gage
and it's nylon lines that are in there now.
Paul Lamar
Paul,
Found a 200 psi, liquid filled 1.5" gauge at "Surplus
Center".........Price is right..........Would need to order
several items to make shipping worthwhile.............Link below
http://www.surpluscenter.com/item.asp?catname=electric&qty=1&item=21-1667
Kelly Troyer
"DYKE DELTA JD2" (Eventually)
"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold
"TURBONETICS"_TO4E50 Turbo
Price is good. Is it panel mount or thread mount? Panel mount would
have
studs and a bracket to hold it from the back. I am nervous putting
mechanical
gauges in a car: Refer previous discussion about Bourdon failures.
Also the
nylon tubing WILL fail and dump oil all over. As regards our old buddy
Murphy,
that oil will end up on a new carpet or your leg. If a mechanical
gauge is
preferred, I would use a stainless braid hose with teflon lining. Best
in my
mind would be an electric gauge. A measure of the electric gauge volts
and
amps and match up a transducer to make it work. Some can be calibrated.
Dale Davies
Dale, you can create an extremely small diameter orifice in the
fitting at block
that, if a line or gauge failure does occur it will be noted on
the gauge with only a very minimum amount of oil lost per minute
of operation.
rog
Yup, generally noted as pulsation damper. Oil loss per minute may be minimal,
but at 15,000 feet you still have a mess to clean up if nothing else. Hot oil
on the leg sucks big time.
Dale Davies
Just hang a catch can under it with a bit of safety wire :)
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.