Subject: Racing a Mazda rotary powered RV6
From: Rotary Engine
Date: 9/25/2011, 11:19 PM
To: AAA Put this in the To box


Most of these airplanes have piston engines with 2 to 5 times the
   displacement of the Mazda 160 ci 13B Wankel yet Dave is competitive.

   With a p-port, more streamlined intake manifold, max 2 rotor
turbo power   will go up from about the current 250 HP to about 300
HP at the same   45 inches of HG boost. Of course boost levels could
go much higher as the

   Wankel block is very robust indeed.

   In car drag racing these turbo engine will develop well over 700
HP   however   that would take a change in gear ratio from the
current 2.17:1 to more   than
   3:1 so the engine can rev to its 10,000 or 11,000 RPM red line without
   exceeding Mach 1 prop tip speed.

   I suspect many of these turbo piston engines racing at Reno are
now using   NOS so the sky is the limit there.

   Perhaps the next step is a cleaner airframe and a 3 or 4 rotor.

   The picture captions are largely self explanatory.
   The guy standing on the left in the fourth picture name is Red
and he was   Dr. Dave's teacher in anesthesiology as well as his
pilot CFI instructor.   He   has a Phd in oceanography as well.

   As a result of the 229 MPH posted Dave has won the $1000 Everett Hatch
   memorial prise for exceeding 220 MPH using a Wankel rotary engine
in an   air   race.   A past winner was Tracy Crook at 210 MPH.

   That depletes the fund and raises the bar to 250 MPH assuming we
get new   donations. First we must beef up the RV tails to raise the
VNE.

   Paul Lamar

   Dave, Amazing accomplishment. Congratulations.

   Paul, re: cleaner airframe suggestion . . . Anyone working on a
either a   Formula 1 or biplane powered rotary?

   Cheers, JL

   Formula 1 requires an O-200. I don't know about biplane. I have
not heard   anything. Come to think of it a Formula 1 airframe might
qualify for the   sports   class if it was a kit. The Sports rule
used to require 2 place but I don't   know if that is still true.

   Paul Lamar

   Bob Mears should be pretty close to first flight on his 3-rotor
   Supermarine
   Spitfire.  That ought to shake up the Sports class at Reno.

   Mark S.

  What scale is the Spitfire?

  Van

  Van,

I think it is 3/4 scale.  Try a google search on "Supermarine Spitfire".
  They have a web site.  Very cool airplane.

Mark



What is the power of the IO-720 powered Nemesis NXT? Are NXT's available? A 4
rotor turbo compound should give an easy and reliable 1200 to 1400 HP. Depends
on the boost. When you can get 1200 out of a 3 rotor, a 4 ought to be no
problem with power recovery. My money says that would shake things up big time!

Dale Davies

Hard to tell as most Reno aircraft engines are souped up by a company called Lycon.


Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.