Subject: Cessna's plastic airplane coming apart in flight
From: Rotary Engine
Date: 9/26/2011, 3:25 PM
To: AAA Put this in the To box


Welllll, the airplane is made in mexico.

Subject: Cessna's plastic airplane coming apart in flight

Interesting in that now humidity is a factor in building composite
aircraft.  We have a lot to learn.  Hope the 787 had the right humidity.


http://www.aero-news.net/index.cfm?do=main.textpost&id=b3128425-d9ef-44df-887f-2f1092a0f4c0

ROBERT YOUNG

You know its bad when you almost kill the FAA guy.

Mark S.


I'm a dyed in the wool Luddite when it comes to aircraft construction. Give me aluminum and steel. Just too many things to keep track of with composites, resins, storing of the resin, fabric, lay up, bagging, curing, vacuum, hidden voids, humidity, magnetic deviation..blah, blah, blah.
Composite is a high dollar, high skill level, technique. Not that it's bad, but it's a whole nuther world of shit to keep track of.
Metal on the other hand is what it is. You can see it, cut it, and rivet it. On new construction, you don't need to check the wet bulb/dry bulb, If your holes are lined up, deburred, and the margins are there, you can pull rivets year around.
Your results may vary.
C. Smith


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.