Paul,
Are you familar with these gears ?...........
Kelly Troyer
"DYKE DELTA JD2" (Eventually)
"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold
"TURBONETICS"_TO4E50 Turbo
No. Why?
Paul Lamar
Allison truck automatic trans 4000 TRV is rated for 600hp and 2,000lbs tourque
and has a first gear ratio of 3.51:1 assuming a max prop rpm of 2,700
that gives you 9,477 engine rpm. Some of the reverse ratios are up in the 5:1
range.
Dave James
Allison or Dodge?
A bit high RPM for a aircraft gear box.
What do they weigh?
Here is what I have on Allison. Does not look the same. I'll
bet the parts are a lot more expensive. Have any weights or dimensions?
Paul Lamar
I I looked it up on the Allison web site, no weights were listed. What is a
reasonable weight to look for? Also if balanced and with proper bearings and
lots of lube, will the increased rpm exceed the planetary system capability?
David James
Here are some weights of the Ford parts.
Not so far.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.