Paul,
Are you familar with these gears ?...........
Kelly Troyer
"DYKE DELTA JD2" (Eventually)
"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold
"TURBONETICS"_TO4E50 Turbo
No. Why?
Paul Lamar
Larry Neal of New Horizons use a Dodge set on a 13b gyroplane... and
the teeth disintegrated with a sudden stop. Went back to Ford and
haven't had a problem since then... (using the SAME lubrication
method I might add!!)
Gary Buster
Frankston Texas T25
Which trans and year were Larry's gears from and the ratio? Chrysler
Corp
has had QC problems at times over the years with different things.
What did failure analysis determine?
Dale Davies
I didn't see the failure personally, so my observations are only hangar talk
observations. Rusty Nance's 13b Air Command gyroplane in North Carolina was
the culprit. I remember hearing the gears were blue'd and the pieces parts
sheared evenly off of the spline of the planet barrel. Sorry, I don"t have
a clue regarding the donor vehicle application for the gearset.
Larry said he changed back to the Ford gearsets and hasn't had a problem
since then. As far as I know, he hasn't changed the lubrication parameters
at all between the two gearsets.
Gary Buster
T25 East Texas
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.