Anybody know how to take ASCII data in from a USB port using
  the Linux command line? I have a USB GPS receiver probably putting out
  NEMA 0183 ASCII data every one second.

  -------------------------------

  When I do "dmesg" I get this among other things.

  [337219.194564] usb 2-5: USB disconnect, address 10
  [353725.772224] usb 8-1: new full speed USB device using uhci_hcd and
  address 2
  [353725.976107] usb 8-1: configuration #1 chosen from 1 choice
  [353726.141383] usbcore: registered new interface driver usbserial
  [353726.141398] USB Serial support registered for generic
  [353726.141423] usbcore: registered new interface driver
 usbserial_generic
  [353726.141425] usbserial: USB Serial Driver core
  [353726.155861] USB Serial support registered for DeLorme Earthmate USB
  [353726.155874] USB Serial support registered for HID-COM RS232 Adapter
  [353726.155886] USB Serial support registered for Nokia CA-42 V2
Adapter
  [353726.155906] cypress 8-1:1.0: DeLorme Earthmate USB converter
 detected

  [353726.157262] usb 8-1: DeLorme Earthmate USB converter now
attached to
  ttyUSB0

  [353726.157280] usbcore: registered new interface driver cypress
  [353726.157282] cypress_m8: v1.09:Cypress USB to Serial Driver
  [353726.177064] usbcore: registered new interface driver hiddev
  [353726.177081] usbcore: registered new interface driver usbhid
  [353726.177083] usbhid: v2.6:USB HID core driver


  What do I do now?

  Paul Lamar

  Paul,

  Try installing cutecom with your package manager. If you use yum:

  yum install cutecom

  CuteCom is a graphical serial terminal, like minicom or
Hyperterminal on
  Windows. It is aimed mainly at hardware developers or other people who
  need a terminal to talk to their devices.

  Mark LaPierre


  root@paul-desktop:~# yum install cutecom
  The program 'yum' is currently not installed. You can install it by
 typing:
  apt-get install yum
  bash: yum: command not found
  root@paul-desktop:~#


  Then I did.

  root@paul-desktop:~# yum install cutecom
  The program 'yum' is currently not installed. You can install it by
 typing:
  apt-get install yum
  bash: yum: command not found
  root@paul-desktop:~#
  root@paul-desktop:~#
  root@paul-desktop:~#
  root@paul-desktop:~#
  root@paul-desktop:~# apt-get install cutecom
  Reading package lists... Done
  Building dependency tree
  Reading state information... Done
  The following packages were automatically installed and are no longer
  required:
  vim-gui-common vim-runtime
  Use 'apt-get autoremove' to remove them.
  Suggested packages:
  lrzsz
  The following NEW packages will be installed:
  cutecom
  0 upgraded, 1 newly installed, 0 to remove and 1 not upgraded.
  Need to get 50.1kB of archives.
  After this operation, 184kB of additional disk space will be used.
  WARNING: The following packages cannot be authenticated!
  cutecom
  Install these packages without verification [y/N]? y
  Err http://us.archive.ubuntu.com jaunty/universe cutecom 0.20.0-1
  404 Not Found [IP: 91.189.92.171 80]
  Failed to fetch

http://us.archive.ubuntu.com/ubuntu/pool/universe/c/cutecom/cutecom_0.20.0-1_i386.deb

  404 Not Found [IP: 91.189.92.171 80]
  E: Unable to fetch some archives, maybe run apt-get update or try with
  --fix-missing?
  root@paul-desktop:~#

  Then this happened.

  SNIP<<<<

  E: Some index files failed to download, they have been ignored, or old
  ones used instead.
  root@paul-desktop:~#



  Paul Lamar


  It appears that the package server was off line. Ã? It failed to find
 the
  cutecom package as well as all the other issues that I SNIPed out.

  Try looking for a terminal program using your software installation
  utility. Ã? I use Fedora so my example is based on Fedora with the
Gnome
  desktop. Ã? Ubuntu uses the same Gnome desktop so this might be good.

  Go to: System|Administration|Add/Remove Software

  In the search box provided type in "terminal" without the quotes.
  Select the terminal you want to try and then install it from there.

  It is possible that your repository files on your desktop are out or
  date. Ã? How old is your current Ubuntu installation? Ã? Have you
run an
  upgrade from a previous version to the current version at some time in
  the past?

  Mark LaPierre


  I searched high and low for Unbuntu but maybe I need to switch back
  to red hat.

  My current Ubuntu is a couple of years old.

  Paul Lamar


  Â Paul,

  Â Since you are using Ubuntu, I would suggest using gtkterm. You
 should be
  Â able to get it via synaptic package management.

  Â Sent from Henry Nee



  I have read the whole thread.... minicom is the standard text based
  terminal for communications.
  It used to be part of the minimal install of fedora back in the modem
  days. Now you have to add it.
  Blake


  --
  Blake C. Lewis


  If I send the GPS to you can you get it to work?

  Paul Lamar



 What kind of GPS?
 Blake C. Lewis


 Some kind of USB connected GPS Delorme ships
 with their moving map software for windows.

 It is a ASCII NEMA 0183 protocol. Once a second.

 S-Ident Z Time  uSEC    Latitude   Longit     Speed  Hdg D-M-Yr
Checksum
 $GPRMC,144051.023550,A,3352.269,N,11823.157,W,0000.4,190,120593,,,*27


 $GPGGA,084940.918483,3352.261,N,11823.168,W,1,4,001,,M,-00038,M,,,
 $GPGLL,3352.26,N,11823.16,W,084940.918483
 $GPRMC,084941.918482,A,3352.261,N,11823.168,W,0000.6,010,130993,,,*2F
 $GPRMB,V,,,,,,,,,,,,*30
 $GPGGA,084942.918481,3352.261,N,11823.168,W,1,4,001,,M,-00036,M,,,
 $GPGLL,3352.26,N,11823.16,W,084942.918481
 $GPRMC,084943.918480,A,3352.261,N,11823.167,W,0000.9,355,130993,,,*2D
 $GPRMB,V,,,,,,,,,,,,*30
 $GPGGA,084944.918478,3352.261,N,11823.166,W,1,4,001,,M,-00034,M,,,
 $GPGLL,3352.26,N,11823.16,W,084944.918478
 $GPRMC,084945.918477,A,3352.261,N,11823.165,W,0001.1,352,130993,,,*2F
 $GPRMB,V,,,,,,,,,,,,*30
 $GPGGA,084946.918476,3352.261,N,11823.165,W,1,4,001,,M,-00032,M,,,
 $GPGLL,3352.26,N,11823.16,W,084946.918476
 $GPRMC,084947.918475,A,3352.261,N,11823.164,W,0000.5,013,130993,,,*2D
 $GPRMB,V,,,,,,,,,,,,*30
 $GPGGA,084948.918474,3352.261,N,11823.163,W,1,4,001,,M,-00031,M,,,
 $GPGLL,3352.26,N,11823.16,W,084948.918474
 $GPRMC,084949.918473,A,3352.261,N,11823.163,W,0000.7,008,130993,,,*2A
 $GPRMB,V,,,,,,,,,,,,*30
 $GPGGA,084950.918472,3352.260,N,11823.163,W,1,4,001,,M,-00029,M,,,
 $GPGLL,3352.26,N,11823.16,W,084950.918472
 $GPRMC,084951.918471,A,3352.260,N,11823.163,W,0001.0,350,130993,,,*28
 $GPRMB,V,,,,,,,,,,,,*30
 $GPGGA,084952.918470,3352.259,N,11823.162,W,1,4,001,,M,-00027,M,,,
 $GPGLL,3352.25,N,11823.16,W,084952.918470
 $GPRMC,084953.918468,A,3352.259,N,11823.162,W,0000.9,358,130993,,,*29
 $GPRMB,V,,,,,,,,,,,,*30
 $GPGGA,084954.918467,3352.259,N,11823.161,W,1,4,001,,M,-00026,M,,,
 $GPGLL,3352.25,N,11823.16,W,084954.918467

 This will allow a remote mount of the antenna for a moving map
 program in an Android tablet running Honeycomb. XWing for example.

 Paul Lamar



What exactly do you want to do with the data?  Capture it, pipe it into
another program, ??

In miniterm you should see ttyUSB0 as one of the serial ports available.


Robert Vanzant

Many things just recording it would a good start.

Paul Lamar


I'd apt-get install minicom if you don't already have it.  Use the -s
switch the first time you run it to enter setup mode.  Set the serial
port to /dev/ttyUSB0, fiddle with the baud rate etc, and see what
happens.  As I recall it was somewhat finicky about saving settings, so
confirm that it's actually configured the way you think it is when
trying to listen to the gps.

Bob Vanzant

paul@paul-desktop:~$ sudo -s
[sudo] password for paul:
root@paul-desktop:~# apt-get install minicom
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
 vim-gui-common vim-runtime
Use 'apt-get autoremove' to remove them.
Suggested packages:
 lrzsz
The following NEW packages will be installed:
 minicom
0 upgraded, 1 newly installed, 0 to remove and 1 not upgraded.
Need to get 175kB of archives.
After this operation, 1188kB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
 minicom
Install these packages without verification [y/N]? y

=================================================================
Err http://us.archive.ubuntu.com jaunty/main minicom 2.3-1ubuntu1
 404 Not Found [IP: 91.189.88.31 80]
Failed to fetch http://us.archive.ubuntu.com/ubuntu/pool/main/m/minicom/minicom_2.3-1ubuntu1_i386.deb  404 Not Found [IP: 91.189.88.31 80]
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
root@paul-desktop:~#

=====================================================
root@paul-desktop:~# apt-get install minicom fix-mis
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package fix-mis
root@paul-desktop:~#

========================================================

https://bugs.launchpad.net/ubuntu/+source/minicom/+bug/373194

Looks like it won't work with the version of Ubuntu I have.

Paul Lamar