Subject: Fuel pressure is all over the lot.
From: Rotary Engine
Date: 10/9/2011, 8:55 PM
To: AAA Put this in the To box


Any body running an engine notice that or is it just
my RV4? Also the mixture is rapidly varying which of course
could be caused by the rapidly changing fuel
pressure. My pressure regulator is referenced to intake
manifold pressure. Is everybody doing that?

It is so bad I can't believe the engine runs.
Now that I have learned to steer the RV I can focus
on what is going on with the engine :)

Paul Lamar


How are you monitoring your fuel pressure?


Matt-


With an electronic sensor and an EFIS in the cockpit

There is also a steam gage but I can't see it as it is
under the cowl. I need somebody to stand out there
and read it with the cowl off. Somebody I can trust
to not get in the way of the prop.

Here is a short movie so you can hear it run.


Paul Lamar


reference the fuel pressure to the manifold pressure.
I'll bet the difference between the two remains fairly constant. You
will need a fairly rapid pressure gauge to see the changes. Most older
EFI cars referenced the
manifold pressure. Now some vary fuel pump output to change the fuel
pressure. If it seems to run well
just leave the setup alone.

chris smale


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.