Subject: Fuel pressure is all over the lot.
From: Rotary Engine
Date: 10/9/2011, 9:01 PM
To: AAA Put this in the To box


Any body running an engine notice that or is it just
my RV4? Also the mixture is rapidly varying which of course
could be caused by the rapidly changing fuel
pressure. My pressure regulator is referenced to intake
manifold pressure. Is everybody doing that?

It is so bad I can't believe the engine runs.
Now that I have learned to steer the RV I can focus
on what is going on with the engine :)

Paul Lamar

Paul,
My fuel pressure is steady when manifold pressure is steady, but it moves a
little with change in throttle setting. how much is it moving?


Bill Schertz
KIS Cruiser #4045
N343BS
Phase one testing Completed


Mine is jumping around by about 10 or 20 psi.
It may have something to do with where the pressure sensor is
mounted. Mine is mounted in the T where both pumps
are feeding the main fuel line. I could be seeing unsteady
flow from the pumps. The sensor could be failing as Dave
says he only gets about 50 hours out of the oil pressure sender.

Paul Lamar


Such a description makes me think of resonant feedback ..... the
hydraulic version of flutter on the airframe.

Seems to me that long time ago I saw a gauge damper that was
essentially an inline slug of very porous bronze bearing material
inserted in a gauge line.  You might try finding one of those from a
gauge manufacturer .... after you figure out that the reason for the
big fluctuations is benign.  But first be sure it is not a dangerous
resonant condition.

SD

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2011 All world wide rights reserved.