http://www.nwuav.com/uav-products/uav-rotary-engines.html
chris smale


Hey Perry, Do you know about these guys?

2717 NE Bunn Road
McMinnville, OR 97128

T.503.434.6845 F.503.217.6080


I suspect this is an AIXRO go kart engine in disguise.


PaulLamar


May be it is Aixro, except that rotron advertises two engines sizes ( a
200cc and a 300cc) whereas Aixro has only one size engine in two power
versions, higher power through higher rpm.
Philippe CHENEVIER


That is interesting. Rotary engines are harder to make than they look.

Paul Lamar

   Hi  Paul,
                     They do not look like a AIXRO engine and they are
water cooled, and as you say they are in two sizes.
               This is what I said some time ago, we just need some
smart people to start making these engines, not easy, but, a piston
engine is harder to make, just that it is "common knowlege" the "doos
and the don'ts", with a piston engine, as shown by the "new" aero
engines that fall over.
               John Burey.

They may not look like it but the big one is an AIXRO.
The AIXRO is water cooled. One of the unique features of the AIXRO
is the combined p and side ports clearly shown in the Rotron.

One could say the AIXRO is both approximately 200 cc and 300 cc.
Its marketing :)

Paul Lamar